ForkLift & Material Handling Camera System Solution

Lift truck drivers work every day in places where they can’t always see clearly. When it’s hard to see at the fork tips or behind the truck, it takes more time to move things. There can also be dropped loads, damaged items, bent shelves, or even picking the wrong pallet. Also, when doing this work, people can feel tired, have stress on their bodies, or hurt their back and neck when reaching up. This can make them feel sore and might cause them to miss work.

Forklift front View Wireless Camera System

Many people in the industry know that not being able to see well can cause problems. The LS-070D gives you ForkView. This lets you see the forks clearly when they pick up a load. It also has RearView, which lets you see a wide area behind the truck. When you use the LS-070D camera system kit, your workers can put the forks in place fast and in the right spot. They can also back up in a better and safer way.

2CHs-Wireless-Camera-kit-for-forklift

Wired Camera System for Forklift front View Solution

This 5M (16ft) cable rewinder is a special product from Lintech. It is made to give both power and video for a forklift front view setup. When the front camera is put on the fork, the camera can move up and down. This cable rewinder will let the wire come out or roll back in as needed.

Features:

• 5 meter cable comes with 4 or 5 wires inside

• Made with a TPR strong cable cover

• Can be used with 220VAC at 1A or 36VDC at 3A

• Works in temperatures from -20 to 80 degrees C

• Made for indoor use and not waterproof

• Can be used at least 100,000 times in its natural life

Reverse Parking sensor Vision camera system

For most big heavy duty forklift, reach-truck, or container lifter machines, there is a bigger blind spot for the person who drives it.

Forklifts cause more bad injuries at work than any other kind of transport. People are now paying more attention to making the workplace safer. Lintech’s special Forklift Vision and Sensor tools help drivers see better and be more aware of what is around them. This helps to keep everyone safe while they work.

Because of the way people work indoors and outdoors, and the way the forklift is built, there are many places around the driver that are hard to see. The loud noise on the job makes this problem even worse!
Here are some of the main features of the Lintech Forklift Camera system:

1. You can see all of the back of the forklift when you drive it in reverse.

2. You can see all of the blind spots on the right and left sides.

3. There are reversing sensors that have three different alarm sounds. When the forklift gets closer to something, the alarm gets louder.

Parking Sensor System For Forklift

LED Warning Lights for Forklift Safety

Why We need LED Safety Lights on Warehouse?

1. To cut down on accidents in the warehouse, it is important to know that over 40% of all deadly forklift accidents have a person walking near the forklifts.

2. With these warning lights, people can see a clear line, spot, or bright flashing lights on the floor. This helps them see when they are in the red zone or in the danger zone and when they are safe.

3. These work well for forklifts and big equipment that move in areas where you get many people walking by.